segue home
segue / Timecode playback

Timecode

Be the timecode master for your show

segue outputs SMPTE timecode while it plays. Video and lighting systems chase it. Nothing is slaved to your DAW at showtime.

No credit card required.

segue transport bar: streamer, mix and click, screen flash, scrub, previous cue, stop, play, next cue, GO, tempo flash, mixer and settings

LTC and MTC

LTC goes out on output channel 3 of your audio device, so a device with three or more outputs is required. MTC goes out over MIDI. Choose LTC, MTC or both, and pick the frame rate.

Drift free by design

LTC is generated on the same audio clock as playback, so the two cannot drift apart. MTC is re anchored to the audio position.

Every cue sets its own start

Give each cue a timecode start value. segue outputs it when the cue fires.

Where segue stops

segue has no video or DMX output. Your systems read the timecode and take it from there.

Questions

Can segue run my lighting console?

segue sends timecode and your console chases it.

Do I need a special audio device for LTC?

LTC uses output channel 3, so you need a device with at least three outputs. MTC needs a MIDI output port.

Keep reading

Run your next show from segue

Free for 30 days. No credit card required.

Start your free 30 day trial